العودة   منتدى الإمارات لتداول الأسهم > القسم المتنوع > برامج الكمبيوتر والألعاب

إضافة رد
 
أدوات الموضوع انواع عرض الموضوع
قديم 01-12-2017, 10:50 AM   #1
lasavn
Senior Member
 
تاريخ التسجيل: May 2016
المشاركات: 49,229
افتراضي CAMWorks 2016 SP0 Multilang for Solid Edge ST7-ST8 (x64)

CAMWorks 2016 SP0 Multilang for Solid Edge ST7-ST8 (x64)



CAMWorks 2016 SP0 Multilang for Solid Edge ST7-ST8 (x64) | 1.33 GB


CAM (Computer Aided Manufacturing) Works - a module for creating control programs for CNC machine tools.



Programming milling, turning, turning, milling and wire EDM module means CAMWorks.
* Module CAMWorks allows you to create programs milling, turning, turning, milling and wire EDM. The following types of machines: milling with simultaneous control of two? five axles;
* Turning single and duplex, with one or two slides, with a programmable servo-mechanism (tailstocks, lunettes, catcher details ...);
* Turning and Milling single and duplex, with one or two slides, with a programmable servo-mechanism, with simultaneous control of two? five axles;
* Erosion of two- and chetyrёhosevye.
Treatment is carried out directly into the Solid Edge environment and directly on the model Solid Edge. The results of the programmer are stored in the same model part or assembly Solid Edge. This provides full associativity of the model and tool path that leads to the automatic renewal of the tool path when the model changes. When added to the model Solid Edge any process data, such as signs of roughness, base, tolerances of form and position of surfaces, tolerances on dimensions, engineer-programmer always has immediate access to them, which facilitates the selection scheme based on machine parts and the selection needed to ensure the specified quality parts of the tool and cutting conditions. Detail can be easily adapted to the needs of processing by, for example, to eliminate redundant in terms of processing elements of the geometry or by applying to the executive model dimensions in the middle of the tolerance. While working with the Solid Edge assembly can perform joint processing of multiple parts, program processing a series of parts, or just completely simulate all the real situation on the machine table - all the rigging, logging of any complexity, and so on - for the most complete account the realities of treatment at the earliest stages of the program
Extras. Information: The structure of the main distribution includes libraries installer speeds and feeds (FeedsSpeeds library) which is proposed to be installed automatically and CAMWorks Virtual Machine 2016

Year / Release Date: 2015
Version: 2016 SP0 (build 2015/1106)
Developer: Geometric Technologies, Inc.
Developer website:

http://www.camworks.com/


Bit: 64bit
Language: Multilingual (Russian present)
Medicine: Present (Team-SolidSQUAD)
System requirements:
Preset:
Solid Edge ST7 MP10 (or higher) 64-bit
Solid Edge ST8 MP2 (or higher) 64-bit
MS Access 2003-2013 32bit, 2010 SP1 64bit, 2013 64bit only!
Graphics 1024x768 resolution with minimum 32,768 colours
Disk Space 10GB free
Memory 1GB + RAM (2GB recommended)






http://rapidgator.net/file/240576dac...part1.rar.html
http://rapidgator.net/file/c3d6a74e1...part2.rar.html



http://alfafile.net/file/ovXq/CAMWor...-SSQ.part1.rar
http://alfafile.net/file/ovX9/CAMWor...-SSQ.part2.rar

lasavn متواجد حالياً   رد مع اقتباس
إضافة رد


الذين يشاهدون محتوى الموضوع الآن : 1 ( الأعضاء 0 والزوار 1)
 
أدوات الموضوع
انواع عرض الموضوع

تعليمات المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

BB code is متاحة
كود [IMG] متاحة
كود HTML معطلة

الانتقال السريع


الساعة الآن 08:59 PM


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.